ICE MELTING
The Ice Melting is normally used in microducts for cables with an internal diameter of 3-20 mm.
Ice Melting allow to melt the ice in case water (liquid or by humidity from air compressor) come inside in the pipes with temperature under 0°C (32°F)
It is suggested to use the liquid inside the micro ducts. Any liquid contacts on other surfaces can be removed with a cloth. Use a funnel or pipette, syringe, the closer of the bottle or similar to fill the microducts.
Download technical information
REQUEST INFORMATIONRelated products
-
NO-ADHESIVE FOR SILICONE ARTICLES
Releasing, No-Adhesive for silicone articles and or mandrel pipes For further information, see the technical data sheet Download technical -
NO ADESHIVE AB10
Water base Lubricant for production of rubber pipe by mandrel For further information, see the technical data sheet Download technical -
HYDRO GLISS® GEL
HYDRO GLISS® GEL has been designed to eliminate the friction generated when plastic pipes are coupled with packing rings HYDRO GLISS® GEL finds -
NO ADESHIVE 385
Silicone based Lubricant for production of rubber pipe by mandrel For further information, see the technical data sheet Download technical
You may also like…
-
FO CLEANER
FO Cleaner is a cleaning and decreasing agent for optical fibres It removes dirt, dust and grease from the optical fibres, making for perfect -
Duct Cleaner
Duct cleaner allow to clean the ducts from dust, greasy, dirt the internal side of the duct, by air compress Water base products, Isopropyl alcohol
